Mitsubishi GOT1000 Series Connection Manual page 1112

3 Ethernet setting
(1) Ethernet setting
Item
Host
N/W No.
PLC No.
*1
Type
IP address
*2
Port No.
Communication
*1 For operating CNC monitor function, set N/W No. to "239".
27 - 70
27.4 Ethernet Connection
27.4.5 Setting communication interface (Communication settings)
The host is displayed.
(The host is indicated with an asterisk (*).)
Set the network No. of the connected Ethernet module.
<Default: blank>
Set the station No. of the connected Ethernet module.
<Default: blank>
Set the type of the connected Ethernet module.
<Default: QJ71E71>
Set the IP address of the connected Ethernet module.
<Default: 192.168.0.1>
Set the port No. of the connected Ethernet module.
<Default: 5001>
UDP (fixed)
Example of Ethernet setting
For examples of Ethernet setting, refer to the following.
Section 27.4.10 CNC Side Settings
Description Range
*1
Network No. of CNC
Station No. of CNC
AJ71QE71
IP address of CNC
5001
UDP (fixed)