Mitsubishi GOT1000 Series Connection Manual page 194

5.1 System Configuration
Select a system configuration suitable for your application.
5 - 2
5.1 System Configuration
(1) Connectable network
Connect the GOT to the following network systems as an ordinary station.
• MELSECNET/10 network system (PLC to PLC network) optical loop system
• MELSECNET/10 network system (PLC to PLC network) coaxial bus system
(2) MELSECNET/H network module
When connecting the MELSECNET/H network module to the MELSECNET/10
network system, specify the MELSECNET/10 Mode as a network type.
(3) Conventions used in this section
Numbers (e.g. ) of
correspond to the numbers (e.g.
Use these numbers as references when confirming models and applications.
System configuration and connection conditions
) of System equipment.