Connecting Serial Communication Module (Q Series) - Mitsubishi GOT1000 Series Connection Manual

4.4.1

Connecting serial communication module (Q Series)

1 [Intelligent function module switch setting] on GX Developer
[The intelligent function module switch setting] on GX Developer is not necessary. (When no [intelligent
function module switch setting] is made, the module runs in the GX Developer connection mode.)
A module can be also connected to a GOT by making the following [intelligent function module switch
setting] on GX Developer.
(1) When connecting to the CH1 side
Switch No.
Switch 1
Switch 2
Switch 5
4 - 40
4.4 PLC Side Setting
4.4.1 Connecting serial communication module (Q Series)
Serial communication module (Q Series)
For details of the serial communication module (Q Series), refer to the following
manual.
Q Corresponding Serial Communication Module User's Manual (Basic)
Bit
Specified
Position
value
b0 OFF
b1 OFF
b2 OFF
b3 OFF
CH1 transmission
b4 OFF
settings
b5 OFF
b6 OFF
b7 OFF
b8 to b15
CH1 transmission speed setting
CH1 Communication protocol setting
Station number setting
Description
Operation setting
Data bit
Parity bit
Even/odd parity
Stop bit
*1
Sum check code
Write during RUN
Setting
modifications
*2
Setting
(Operates according
to the GOT side 0000
specifications.)
GX Developer
0000
connection
0th station 0000
H
H
H