Verifying Got Recognizes Connected Equipment - Mitsubishi GOT1000 Series Connection Manual

4.3.6

Verifying GOT recognizes connected equipment

Verify the GOT recognizes connected equipments on [Communication setting] of the Utility.
• Channel number of communication interface, communication drivers allocation status
• Communication unit installation status
Remark
How to display Utility(at default),
When using GT1595-X
When using GT1585-S, GT1575-S,
GT1575-V, GT1575-VN, GT1572-VN,
GT1565-V, GT1562-VN or GT11
When setting the utility call key to 1-point
utility call key
1-point press on GOT screen upper-left corner
utility call key
Simultaneous 2-point press
When setting "Pressing Time" to other than 0 second on the setting screen of the
utility call key, press and hold the utility call key until the buzzer sounds.
For the setting of the utility call key, refer to the following.
GT15 User's Manual
4.3.6 Verifying GOT recognizes connected equipment
4.3 Preparatory Procedures for Monitoring
Utility display
(When using GT15)
4 - 35
1
2
3
4
5
6
7
8