Rs-422 Cable - Mitsubishi GOT1000 Series Connection Manual

4 Connecting terminating resistors
Connect the terminating resistors (330 1/4W (orange/orange/brown/ ) ) on the serial communication
module or computer link module side. No terminating resistor needs to be connected on the GOT side
as one is already built into the GOT.
For details, refer to the following manual:
(1) Other than A2CCPUC24(-PRF)
Connect the terminating resistors supplied with the module across RDA and RDB.
(2) A2CCPUC24(-PRF)
Set TXD and RXD on the terminating resistor setting pin to "A".
4 - 22
4.2 Connection Cable

4.2.2 RS-422 cable

The User's Manual of the serial communication module or computer link module