Functions Whose Settings Are Changed By Enhanced Security Mode - Konica Minolta BIZHUB C3110 Service Manual

Security Function Ver. 1.01 Oct. 2014
7.1.3

Functions whose settings are changed by Enhanced Security Mode

• Setting the Enhanced Security Mode to [ON] changes the setting values of the following
functions.
Function Name
Public User Access
• To permit use by a public user having no
user registration.
Print without Authentication
• To allow or restrict printing which user
and account are not specified.
User Name List
• To display the list key for User names on
user authentication screen.
SSL
• To set whether to encrypt access by
SSL.
SSL Encryption Strength
• To set the SSL encryption strength for
the SSL encryption communication.
FTP Server
• To set whether to use FTP server func-
tion or not.
SNMPv1/v2c
• To use when changing Write setting.
SNMP v3 Security Level and auth-pass-
word/priv-password
• To set the security level for the Reading/
Writing Authority User which is used for
SNMP v3.
Administrator Password Change Via
Network (Pagescope Web Connection)
Telnet
NOTE
• Turning ON the Enhanced Security Mode does not enable the ID & Print function.
To protect image files, be sure to have the administrator enable ID & Print function
manually.
7. Enhancing the security function
When Enhanced Security mode is
Default Setting
Restrict Restrict (not to be changed)
Restrict Restrict (not to be changed)
OFF OFF (not to be changed)
OFF ON (not to be changed)
AES-256,3DES, AES-256/3DES
RC4-128,DES, (not to be changed to one contain-
RC4-40 ing strength lower than AES/3DES)
Enable Disable (Selection can be made
between [Enable] and [Disable])
Read/Write enable Only Read is enabled (not to be
changed)
Auth-password/ auth-password/priv-password
Priv-password (Selection can be made between
[auth-password] and [auth-pass-
word/priv-password])
Enabled Restrict
OFF OFF (not to be changed)
set to [ON]
7