Turning Off The Machine; Automatically Clearing Settings (System Auto Reset) - Konica Minolta magicolor 8650 User Manual

2
2.2.2

Turning off the machine

1
Set the power switch to o.
2
Check that the display panel is turned off.
Reminder
When the power switch is turned off, then on again, wait at least 10 seconds to turn it on after turning
it off. If there is no wait period between turning the power switch off, then on again, the machine may
not function properly.
Do not turn off the machine with the power switch while it is making printing, otherwise a paper misfeed
may occur.
Do not turn off the machine with the power switch while a queued job or stored data is waiting to be
printed, otherwise the jobs will be deleted.
!
Detail
The following are cleared when the power switch is turned off.
Settings that have not been programmed
Jobs queued to be printed.
2.2.3

Automatically clearing settings (System Auto Reset)

If no operation is performed for a specified length of time while settings are being changed, settings that have
not been programmed are cleared and return to their defaults.
This is the system auto reset operation.
As the factory default, the system auto reset operation is performed after 1 minute.
!
Detail
The length of time until the system auto reset operation is performed and whether or not it is performed
can be set from "System Setting" menu. For details, refer to "System Settings" on page 9-21.
2-18
Before using the machine
magicolor 8650