[No Matching Paper In Tray Setting]; [Print Lists]; [Post Inserter Settings]; [Auto Color Level Adjust.] - Konica Minolta bizhub C554 User Manual

[No Matching Paper in Tray Setting]

To display: [Utility] - [User Settings] - [System Settings] - [Paper Tray Settings] - [No Matching Paper in Tray
Setting]
Select the operation to be taken when there is no appropriate sized paper in the specified paper tray.
Settings
[Stop Printing (Tray Fixed)]
[Switch Trays (Tray Priori-
ty)]

[Print Lists]

To display: [Utility] - [User Settings] - [System Settings] - [Paper Tray Settings] - [Print Lists]
Specify the default paper tray and printing method (1-sided or 2-sided) used for printing reports and meter
counts.
You can temporarily change the settings when printing.
The following shows the default functions.
- [Paper Tray]: [Tray 1]
- [Simplex/Duplex]: [1-Sided]

[Post Inserter Settings]

To display: [Utility] - [User Settings] - [System Settings] - [Paper Tray Settings] - [Post Inserter Settings]
Specify the type and the size of paper to be loaded into the paper tray for using Post Inserter.
Settings
[Paper Tray]
[Paper Type]
[Paper Size]
Tips
- This item is available when the Finisher FS-535 and Post Inserter are installed in bizhub C554.

[Auto Color Level Adjust.]

To display: [Utility] - [User Settings] - [System Settings] - [Auto Color Level Adjust.]
Adjust the criteria to determine whether an original is in color or black and white when scanning originals by
specifying the color mode to [Auto Color].
Tap [Black] or [Full Color] to adjust to one of the five levels.
[3] is specified by default.

[Power Supply/Power Save Settings]

To display: [Utility] - [User Settings] - [System Settings] - [Power Supply/Power Save Settings]
This option is available when a user's change is permitted by the administrator. For details, refer to
page 17-5.
bizhub C554/C454/C364/C284/C224
Description
The machines stops printing when there is no appropriate sized paper in
the specified paper tray.
Load paper to the specified paper tray or switch to another paper tray man-
ually.
[Stop Printing (Tray Fixed)] is specified by default.
When the specified paper tray runs out of paper, the machine switches to
the paper tray where paper of the same size is loaded.
Description
Select the paper tray for which paper type and size will be changed. You
can change settings for each tray.
[Paper Type]: Select the type of the paper loaded into the selected paper
tray.
[Plain Paper] is specified by default.
Select the size of paper loaded into the paper tray selected for [Paper
Type].
[Auto Detect] is specified by default.
16
16-7