Scanner Motor (M4) - Konica Minolta BIZHUB 163 Service Manual

Field Service Ver. 1.0 Apr. 2007
6.3.29

Scanner motor (M4)

1. Remove the right rear cover.
See P.47
[1] [1]
[2] [1] [3]
[2]
[2]
[1] [1]
A09AF2C586DA
[2]
[1]
A09AF2C587DA
[2]
A09AF2C588DA
2. Remove the scanner motor harness
from five wire saddles [1].
3. Disconnect the connector [2] from
the MFP board [1].
4. Snap off the C-ring [1].
5. Loosen four screws [2], and remove
the scanner motor harness from the
gear case assy [3].
6. Other
65