Policy Condition Icmptype - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

QoS Policy Commands

policy condition icmptype

Configures an ICMP type value to use for traffic classification.
policy condition condition_name icmptype type
policy condition condition_name no icmptype
Syntax Definitions
condition_name
type
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Use the no form of the command to remove an ICMP type value from a condition; however, at least one
classification parameter must be associated with a condition.
Examples
-> policy condition cond12 icmptype 100
Release History
Release 6.6.1; command was introduced.
Related Commands
policy condition
policy condition icmpcode
qos apply
show policy condition
OmniSwitch CLI Reference Guide
The name of the condition.
The ICMP type value, in the range 0–255.
Creates a policy condition.
Configures an ICMP code value for traffic classification.
Applies configured QoS and policy settings to the current configuration.
Shows information about policy conditions configured on the switch.
November 2009 page 39-75