Connections To The System's Mdf; Hipath 1120; Figure 4-39 Distribution Of Extensions On The Hipath 1120 Mdf - Siemens HiPath 1100 Service Manual

Installation

Connections to the system's MDF

4.9 Connections to the system's MDF
Introduction
Attach cables to the system's Main Distribution Frame and route them through the conduits and
openings to reach the carrier's main telephone distribution cabinet. Below are some examples
of configurations.
4.9.1

HiPath 1120

Example
*
The installation of a KS type system telephone requires a CD pair in conjunction with an A/B extension slot (see
"Installing telephone terminals" on page 4-186).
Figure 4-39 Distribution of extensions on the HiPath 1120 MDF
.
Warning
!
When using the RSA version, extension lines with a C/D interface must only be in-
stalled indoors. Only regular extensions (without a C/D interface) can be installed
outdoors.
4-170
Service Manual