Table of Contents
Advertisement
Nur für den internen Gebrauch
2.1.4
Design and Dimensions of the HiPath 3000 Systems
2.1.4.1
Design and Dimensions of HiPath 3800
Two configurations
Depending on the requirements, HiPath 3800 can be used as:
a single-cabinet system (basic cabinet BC)
●
a two-cabinet system (BC + expansion cabinet EC)
●
Design
The basic cabinet BC has nine slots and the expansion cabinet EC has thirteen slots for pe-
ripheral boards. The common control board CBSAP has a fixed slot (slot 6, only in the BC).
Depending on your requirements, up to three LUNA2 power supply units can be used in the
basic cabinet BC and up to four in the expansion cabinet EC.
The HiPath 3800 has various connection options for connecting the peripherals:
SIVAPAC connectors are available on the backplane for connecting the external main dis-
●
tribution frame MDFU-E using CABLUs (prefabricated cabling units) or to connect external
patch panels.
Connector panels with RJ45 jacks for connecting the peripheral device directly. The con-
●
nector panels are clipped onto the SIVAPAC connectors on the backplane.
For U.S. only: connector panels with CHAMP jack for connecting the peripheral device di-
●
rectly. The connector panels are clipped onto the SIVAPAC connectors on the backplane.
Connector panels with SIPAC 1 SU connectors for connecting the external main distribu-
●
tion frame MDFU-E or external patch panels using CABLUs. The connector panels are
clipped onto the SIVAPAC connectors on the backplane.
The type of connection used will be decided in consultation with the customer on conclusion of
the agreement. The cabinets will be delivered accordingly with or without clipped-on connector
panels.
Two installation options
HiPath 3800 is suitable for installation both as a standalone system and in a 19-inch cabinet.
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
sysdat.fm
System Data
HiPath 3000
2-5
Hide quick links:
Advertisement
Table of Contents
