6.2 Snmp; Snmp Function - Siemens SWT 3000 Equipment Manual

SNMP and Remote Access

6.2 SNMP

6.2 SNMP

SNMP Function

6.2.1
The SNMP agent allows the request of system parameters and a limited control (commands) of the SWT 3000
from a central NMS via TCP/IP. The SNMP agent provides an image of the SWT 3000 status. Spontaneous alarm
indications (traps) are transmitted to the NMS.
[dwsnmrem-080611-01.tif, 1, en_US]
Figure 6-3
↔ Protection signal transmission path
RM Inband remote monitoring/maintenace channel
Remote monitoring/maintenance
Remote access
Hub/Switch
Network management
Office
The minimum setting of the SNMP agent is:
•
Local IP address
•
Trap destinations IP address
•
Trap delay and repetition suppression
•
Community string
•
Configuration via Web browser (password protected)
276
SNMP & Remote Access via IP Network
Remote monitoring/maintenance
Remote access
Hub/Switch
Network management
Office
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020