Disassembly Of Counter Drive Gear - Toyota 1991 Camry Repair Manual

Free
Lock
Hold
AUTOMATIC TRANSAXLE
6. INSTALL DIRECT CLUTCH ON CASE
AT7721
7. RECHECK PISTON STROKE OF DIRECT CLUTCH
Using a dial indicator, measure the piston stroke while
applying and releasing the compressed air (4 - 8 kg/
cm
SST
Piston stroke:
SST
AT3634

DISASSEMBLY OF COUNTER DRIVE GEAR

1. CHECK OPERATION OF ONE-WAY CLUTCH
Turn
(a)
(b)
(c)
AT3645
2. CHECK COUNTER DRIVE GEAR PRELOAD
(a)
HINT: Do not let the counter drive gear touch the vise.
AT3646
(b)
Preload (at starting): 940 - 1,560 g
HINT: Turn the counter drive gear right and left several
times before measuring the preload.
AT3751
- Component Parts (Overdrive Unit)
2
, 57 - 114 psi or 392 - 785 kPa) as shown.
1.75 - 2.49 mm
(0.0689 - 0.0980 in.)
09350-32014 (09351-32190)
Install the overdrive direct clutch into the one-way
clutch.
Hold the overdrive direct clutch and turn the inter-
mediate shaft. The shaft should turn freely clock-
wise and should lock counterclockwise.
Remove the overdrive direct clutch.
Hold the overdrive planetary gear in a vise with
soft jaws.
Using a tension gauge, measure the preload.
(2.1 - 3.4 lb, 9.2 - 15.3 N)
AT-73