Security Configuration Command Set
Configuring MAC Authentication
14.3.7.9
set macauthentication authallocated
Use this command to set the number of MAC authentication sessions allowed for one or more ports.
set macauthentication authallocated number port-string
Syntax Description
number
port-string
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to set the number of allowed MAC authentication sessions to 4 on ge.2.1:
Matrix(rw)->set macauthentication authallocated 4 ge.2.1
14-90 Matrix NSA Series Configuration Guide
Specifies the number of authentication sessions allowed.
Specifies port(s) on which to set the number of
authentication sessions. For a detailed description of
possible port-string values, refer to
Section
4.1.1.