Security Configuration Command Set
Configuring MAC Authentication
14.3.7.13 set macauthentication reauthentication
Use this command to enable or disable reauthentication of all currently authenticated MAC
addresses on one or more ports.
set macauthentication reauthentication {enable | disable} port-string
Syntax Description
enable | disable
port-string
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to enable MAC reauthentication on ge.4.1 though 5:
Matrix(rw)->set macauthentication reauthentication enable ge.4.1-5
14-94 Matrix NSA Series Configuration Guide
Enables or disables MAC reauthentication.
Specifies port(s) on which to enable or disable MAC
reauthentication. For a detailed description of possible
port-string values, refer to
Section
4.1.1.