set logging application
90
1(emergencies)
4(errors)
7(information)
Table
10‐2 provides an explanation of the command output.
Table 10-2 show logging application Output Details
Output...
Application
Current Severity Level
Server List
set logging application
Use this command to set the severity level of log messages and the server(s) to which messages
will be sent for one or all applications.
Syntax
set logging application {[mnemonic | all]} [level level] [servers servers]
Parameters
mnemonic
all
level level
servers servers
SNMP
2(alerts)
5(warnings)
8(debugging)
Specifies a case sensitive mnemonic abbreviation of an application to be
logged. This parameter will vary depending on the number and types
of applications running on your system. To display a complete list, use
the show logging application command as described in "show logging
application" on page 10‐7. Sample values and their corresponding
applications are listed in Table
Sets the logging severity level for all applications.
(Optional) Specifies the severity level at which the server will log
messages for applications. Valid values and corresponding levels are:
1 - emergencies (system is unusable)
2 - alerts (immediate action required)
3 - critical conditions
4 - error conditions
5 - warning conditions
6 - notifications (significant conditions)
7 - informational messages
8 - debugging messages
(Optional) Specifies index number(s) of the Syslog server(s) to which
messages will be sent. Valid values are 1 ‐ 8 and are set using the set
logging server command ("set logging server" on page 10‐4).
6
3(critical)
6(notifications)
What it displays...
A mnemonic abbreviation of the textual description for applications
being logged.
Severity level at which the server is logging messages for the listed
application. This range (from 1 to 8) and its associated severity list is
shown in the CLI output. For a description of these entries, which are
set using the set logging application command, refer to
application" on page 10-9.
Servers to which log messages are being sent.
10‐3.
Enterasys Matrix DFE-Gold Series Configuration Guide 10-9
Configuring System Logging
1-8
"set logging