Renault Laguna III Manual page 2791

Table of Contents

Advertisement

Steering column switch assembly: Removal - Refitting
a Check that the index (6) is aligned with the clips (7) .
a Check that the index (8) appears in the little window.
CONTROL - SIGNALS
125367
125368
84A-6
a In the event of a replacement operation, remove the
pin (9) .
a Refit:
- the cowlings under the steering wheel,
- the steering wheel (see Steering wheel: Removal
- Refitting) (36B, Power-assisted steering),
- the driver's front airbag (see 88C, Air bag and Pre-
tensioners, Driver's frontal airbag: Removal -
Refitting, page 88C-14) .
a Connect the battery (see 80A, Battery, Battery: Re-
moval - Refitting, page 80A-4) .
ELECTRONIC STABILITY PROGRAM
a In the event of replacement, check the axle assem-
blies (see Axle assemblies: Check) .
a In the event of replacement, apply the after repair
procedure using the Diagnostic tool :
- connect the Diagnostic tool,
- select « ABS_ESP computer » ,
- go to repair mode,
- display the « before/after repair procedure » for the
computer selected,
- carry out the operations described in the « After re-
pair procedure » section.
84A
125371

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents