Ipv6 Bgp Commands; Address-Family - Dell Z9500 Reference Manual

Parameters
word
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
7.8.1.0
7.7.1.0
7.6.1.0
Example
Dell#show running-config extcommunity-list test
ip extcommunity-list test
Dell#

IPv6 BGP Commands

IPv6 border gateway protocol (IPv6 BGP) is an external gateway protocol that transmits interdomain
routing information with extended IP address space within and between Autonomous Systems (AS).
Basically, two routers (called neighbors or peers) exchange information including full routing tables and
periodically send messages to update those routing tables.

address-family

Enable the IPv4 multicast or the IPv6 address family.
Z9500
Syntax
address-family [ipv4 multicast| ipv6unicast]
Parameters
ipv4multicast
ipv6unicast
Border Gateway Protocol
Enter the name of the extended community list you want to
view.
Description
Introduced on the Z9500.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
permit rt 65033:200
deny soo 101.11.11.2:23
permit rt as4 110212:340
deny regex ^(65001_)$
Enter BGPv4 multicast mode.
Enter BGPv6 mode.
477