Configuring An Ip Access Group - Dell PowerConnect B-FCXs User Manual

Source Range System
defined
Destination
Destination Port System
defined
Destination Range
System defined

Configuring an IP access group

Select Configure > System > IP Access group to configure an IP access group.
FIGURE 53
The IP group contains the following information.
Port
Direction
ACL Number
Add
PowerConnect B-Series FCX Web Management Interface User Guide
53-1002268-01
Enables you to define the source range system.
Enables you to define the destination port system.
Enables you to define the destination range system.
Configuring a IP access group
The port attached to the device for which the entry was made.
Specifies the direction you want the filtering to take place.
Displays the ACL number.
Allows you to add the port number.

Configuring an IP access group

4
71