Command
Version
History
9.5(0.1)
9.3(0.1)
8.3.11.1
8.2.1.0
8.1.1.0
7.6.1.0
7.5.1.0
ip telnet server enable
Enable the Telnet server on the switch.
Z9500
Syntax
ip telnet server enable
To disable the Telnet server, use the no ip telnet server enable command.
Defaults
Enabled
Command
CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.11.1
8.1.1.0
7.6.1.0
7.5.1.0
6.1.1.0
Control and Monitoring
Description
Introduced on the Z9500.
Introduced on the S4810, S4820T, S6000, and Z9000.
Introduced on the Z9000
Increased number of VLANs on ExaScale to 4094 (was
2094)
Introduced on E-Series ExaScale
Support added for S-Series
Introduced on C-Series
Description
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
117