Debug Igmp - Allied Telesis IE220 Series Manual

IGMP IGMP S C
AND NOOPING OMMANDS

DEBUG IGMP

debug igmp
Overview Use this command to enable debugging of either all IGMP or a specific component
of IGMP.
Use the no variant of this command to disable all IGMP debugging, or debugging
of a specific component of IGMP.
Syntax debug igmp {all|decode|encode|events|fsm|tib}
no debug igmp {all|decode|encode|events|fsm|tib}
Modes Privileged Exec and Global Configuration
awplus#
Example
awplus(config)#
Related show debugging igmp
commands
undebug igmp
Command Version 5.4.7-1.1: VRF-lite support added SBx8100.
changes
Version 5.4.8-1.1: VRF-lite support added x930, SBx908 GEN2.
C613-50644-01 Rev B
Parameter Description
all
Enable or disable all debug options for IGMP
decode
Debug of IGMP packets that have been received
encode
Debug of IGMP packets that have been sent
events
Debug IGMP events
fsm
Debug IGMP Finite State Machine (FSM)
tib
Debug IGMP Tree Information Base (TIB)
configure terminal
debug igmp all
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
968