Show System Mac - Allied Telesis AT-x510-28GTX Command Reference Manual

S C M
YSTEM ONFIGURATION AND

SHOW SYSTEM MAC

show system mac
Overview This command displays the physical MAC address available on a standalone
switch, or a stack. This command also shows the virtual MAC address for a stack if
the stack virtual MAC address feature is enabled with the
stack enable
show system mac
Syntax
Mode User Exec and Privileged Exec
Usage For more information about the virtual MAC address feature, see the
Feature Overview and Configuration
Example To display the physical MAC address enter the following command:
awplus#
Output Figure 7-20: Example output from the show system mac command
Output Figure 7-21: Example output showing how to use the stack virtual-mac
Related stack virtual-mac
Commands
C613-50102-01 REV C
C
ONITORING OMMANDS
command.
show system mac
awplus#show system mac
eccd.6d9d.4eed (system)
command and the show system mac command
awplus#configure terminal
Enter configuration commands, one per line.
awplus(config)#stack virtual-mac
% Please check that the new MAC 0000.cd37.0065 is unique within 
the network.
% Save the config and restart the system for this change to take 
effect.
Member1#copy run start
Building configuration...
[OK]
Member1#reload
reboot system? (y/n): y

... Rebooting at user request ...
Loading default configuration ....

awplus login: manager
Password:

awplus>show system mac
eccd.6d9d.4eed

Virtual MAC Address 0000.cd37.0065
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
stack virtual-mac
Guide.
End with CNTL/Z.
or the
VCStack
276