Figure 2.16 Setting A Password For The Master Key - Fujitsu ETERNUS LT140 User Manual

Chapter 2 Setup and Operation Procedures
2.1 Basic Setup
Procedure
1
Move to the [Configuration > Encryption > LT Encryption] screen.
2
Select [Master Keys] > [Export Key] on the center pane.
3
Enter the password in both boxes.
The password must be specified within 8 to 16 characters. Uppercase and lowercase alphanumeric
characters and special characters can be used.
The password is required to import the master key. Keep the password in a safe place.

Figure 2.16 Setting a password for the master key

FUJITSU Storage ETERNUS LT140 Tape Library Key Management Function Option User's Guide
38
Copyright 2019 FUJITSU LIMITED P3AG-3762-02ENZ0