Chapter 7 Setup
7.2 Basic Setup
3-1
3-2
4
4-1
4-2
Set the necessary parameters, and click the [Next >] button.
Figure 7.4
[Set Storage System Name] screen
A confirmation screen appears.
Click the [OK] button.
The machine name is set, and the [Change Password] screen appears.
Change the password.
Change the initial account password.
Set the necessary parameters in [Set Password], and click the [Next >] button.
Figure 7.5
[Change Password] screen
A confirmation screen appears.
Click the [OK] button.
The password is changed. For the ETERNUS DX60/DX80, go to
parameters". For the ETERNUS DX90, go to "Modify the FC Port Mode".
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Copyright 2011 FUJITSU LIMITED
144
Step 6
"Set the port
P3AM-3042-08ENZ0