3.11.10 Changing The Password; Figure 3.48 Password Change Window; Table 3.35 Password Setup Items - Fujitsu ETERNUS LT270 S2 User's Manual -Panel Operation

Chapter 3 Remote Panel Operation
3.11 Setting Library Information

3.11.10 Changing the Password

This section explains how to change the password used to log in to the remote panel.
Procedure
1
Click the [Password] button displayed under [Setup]. The following window is displayed.

Figure 3.48 Password change window

2
Set each item.

Table 3.35 Password setup items

Display item
Login name
Current password
New password
New password
(confirmation)
FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
Select the login name whose password you want to change.
Enter the current password (one to eight characters). Characters that can be entered
are lowercase alphabetic characters, numeric characters and the period (.) symbol.
Enter a new password (one to eight characters). Characters that can be entered are
lowercase alphabetic characters, numeric characters and the period (.) symbol.
Enter the new password again.
135
Copyright 2020 FUJITSU LIMITED
Explanation
P3AM-6932-06ENZ0