Bgp Policy Range Lessthan; Bgp Propmedmode; Bgp Router-Id - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-

14.8.33 bgp policy range lessthan

This command adds a less than range specification to a policy identified by <
< parameter is an integer from 0 to 4294967295.
value>
Default
Format
Mode

14.8.34 bgp propmedmode

This command informs the BGP4 module to enable propagation of the
MULTI_EXIT_DISC (MED) metric. The possible values for this field are
disable.
Default
Format
Mode
14.8.34.1 no bgp propmedmode
This command informs the BGP4 module to disable propagation of the MED metric.
Format
Mode

14.8.35 bgp router-id

This command sets the system identification of the BGP Router. Generally, this is the
Router IP Address. The Router IP Address will be taken as the default value unless this is
explicitly configured.
Default
Format
Mode
14-80
none
bgp policy range lessthan <index> <value>
Router BGP Config
disabled
bgp propmedmode
Router BGP Config
no bgp propmedmode
Router BGP Config
0.0.0.0
bgp router-id <ipaddress>
Router BGP Config
v1.0, December 2005
The
index>.
and
enable
Routing Commands