Network Ipv6 Enable; Network Ipv6 Address - NETGEAR ProSafe GSM7224P User Manual

• Using IPv6 Management commands, you can send SNMP traps and queries via the
network port.
• The user can manage a device via the network port (in addition to a routing interface).

network ipv6 enable

Use this command to enable IPv6 operation on the network port.
Default
enabled
Format
network ipv6 enable
Mode
Privileged EXEC
no network ipv6 enable
Use this command to disable IPv6 operation on the network port.
Format
no network ipv6 enable
Mode
Privileged EXEC

network ipv6 address

Use this command to configure an IPv6 global address, enable or disable stateless global
address autoconfiguration, and enable or disable dhcpv6 client protocol information for the
network port. You can configure multiple IPv6 addresses on the network port.
Format
network ipv6 address {
dhcp}
Mode
Privileged EXEC
Term Definition
address
IPv6 prefix in IPv6 global address format.
prefix-length
IPv6 prefix length value.
eui64
Formulate IPv6 address in eui64 format.
autoconfig
Configure stateless global address autoconfiguration capability.
dhcp
Configure dhcpv6 client protocol.
no network ipv6 address
Use this command to:
• Remove the manually configured IPv6 global address on the network port interface (with
the option).
address
ProSafe Managed Switch
address/prefix-length
Management Commands
660
[eui64] | autoconfig |