NOTE
If you forget your password while logged out of the command line interface, contact your local technical
support representative, who will advise on your next course of action.
Creating a Management Account
The switch can have a total of 16 management accounts. You can use the default names (admin and
user), or you can create new names and passwords for the accounts. Passwords can have a minimum of
0 characters and can have a maximum of 30 characters.
To create a new account:
1 Log in to the switch as admin.
2 Add a new user by using the following command:
create account [admin | user] <username> {<password>}
Viewing Accounts
To view the accounts that have been created, you must have administrator privileges. To see the
accounts, use the following command:
show accounts
Deleting an Account
To delete a account, you must have administrator privileges. To delete an account, use the following
command:
delete account <name>
Domain Name Service Client Services
The Domain Name Service (DNS) client in ExtremeWare XOS augments the following commands to
allow them to accept either IP addresses or host names:
•
telnet
• download [bootrom | configuration | image]
•
ping
•
traceroute
In addition, the
You can specify up to eight DNS servers for use by the DNS client using the following command:
configure dns-client add domain-suffix <domain_name> | name-server <ip_address>
You can specify a default domain for use when a host name is used without a domain. Use the
following command:
configure dns-client default-domain <domain_name>
ExtremeWare XOS 10.1 Concepts Guide
utility can be used to return the IP address of a hostname.
nslookup
Domain Name Service Client Services
29