Configure Eaps Name - Extreme Networks ExtremeWare XOS Command Reference Manual

Software version 11.5

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

configure eaps name

configure eaps <old_name> name <new_name>

Renames an existing EAPS domain.

Syntax Description

Usage Guidelines

If you use the same name across categories (for example, STPD and EAPS names), Extreme Networks

recommends that you specify the identifying keyword as well as the actual name. If you do not use the

keyword, the system may return an error message.

The following command renames EAPS domain "eaps-1" to "eaps-5":

configure eaps eaps-1 name eaps-5

This command was first available in ExtremeWare XOS 11.0.

Platform Availability

This command is available on all platforms.

ExtremeWare XOS 11.5 Command Reference Guide

Specifies the current name of an EAPS domain.

Specifies a new name for the EAPS domain.

configure eaps name

Extremeware xos 11.5