Default
Mode
Command
History
ip igmp last-member-query-count
Syntax
Mode
Command
History
ip igmp last-member-query-interval
Syntax
Default
Mode
Command
History
|
IP Multicast Commands
472
disabled
Interface VLAN
Version 2.3
Introduced
This command sets the number of group-specific queries sent before the router assumes that there are
no local members on the interface or VLAN.
The no version of this command resets the number of Group-Specific Queries to the default value.
ip igmp last-member-query-count
no ip igmp last-member-query-count
The range for
count
is 1 to 20.
Interface Config or Interface VLAN
Version 2.3
Modified: Added Interface VLAN mode.
This command configures the Maximum Response Time being inserted into group-specific queries
sent in response to Leave Group messages on the interface or VLAN.
The no version of this command resets the Maximum Response Time being inserted into
Group-Specific Queries sent in response to Leave Group messages on the interface to the default value.
ip igmp last-member-query-interval
no ip igmp last-member-query-interval
The range for
is 0 to 255 tenths of a second.
seconds
10 tenths of a second (1 second)
Interface Config or Interface VLAN
Version 2.3
Modified: Added Interface VLAN mode.
count
seconds