Show Interface Ethernet - Dell Force10 S2410-01-10GE-24P Command Reference Manual

show interface ethernet

Syntax
Parameters
Mode
Command
History
Usage
Information
| System Management Commands
50
show interface
managementethernet
show interfaces port-channel
show ip interface
show interfaces
This command displays detailed statistics for a specific port or for all CPU traffic based upon the
argument.
show interface ethernet
{
switchport
unit/slot/port
1-3965
Privileged Exec
Version 2.5.1 Modified: Many report fields changed
This command displays distinctly different reports, depending on the entered parameter.
shows an example of the show interface ethernet report when the keyword
Figure 5-12
switchport is added.
Table 5-7 on page 51
shows an example of the show interface ethernet report when the argument is unit/
Figure 5-13
slot/port.
Table 5-8 on page 52
Displays information about the management interface to the switch.
Displays detailed statistics for a specific LAG or summary information for all
LAGs, based upon the argument.
Displays summary information about IP configuration settings for all ports in
the router.
Displays information about a selected interface or VLAN
switchport | unit/slot/port | 1-3965 }
The display parameters for when
unit/slot/port.
the list for
,
Valid unit, slot and, port number, separated by forward slashes. The display
parameters are shown below.
VLAN ID
contains an explanation of the report fields.
contains an explanation of the report fields.
switchport
is entered, are shown below