File System; Settings; Selecting And Configuring Secure Remote Services Delivery - Dell EMC PowerProtect DD6400 System Expansion Manuallines

File System

The File System section displays the amount of usable storage on the system after the file system is created. The Cache Tier
value always displays as 0 before the file system is created.

Settings

The Settings section provides fields to specify some administrative options for the system.
Table 9. Settings page values
Item
Location
Time Zone
Time Synchronization
NTP Servers
Admin Email
Mail Server
Mail Server Credentials
Selecting and configuring Secure Remote Services
delivery
Secure Remote Services Virtual Edition (VE) Gateway provides automated connect home and remote support activities through
an IP-based solution that is enhanced by a comprehensive security system.
About this task
An on-site Secure Remote Services version 3 gateway provides the ability to monitor both on-site protection systems and DDVE
instances, and cloud-based DDVE instances.
Steps
1. Select Maintenance > Support > Autosupport.
2. Click Configure in the Channel row in the Support area.
The Configure Dell EMC Support Delivery dialog box appears. The delivery method is displayed after the Channel label in the
Support area.
3. In the Channel list box, select Secure Remote Services.
4. Type the gateway hostname, and select the local IP address for the system.
5. Click OK.
6. Type the service link username and password.
7. Click Register.
Secure Remote Services details are displayed in the Autosupport panel.
8. To test ConnectEMC operation, use the CLI.
#support connectemc test
Sending test message through ConnectEMC...
Test message successfully sent through ConnectEMC.
Description
Specify a system location.
Select the Time Zone where the system resides.
Select NTP or manual time synchronization
Select DHCP or manually configure NTP servers.
Specify the system administrator email address.
Specify the mail server for sending alerts and autosupport emails.
Select whether mail server credentials are required.
Configure System for Use 39