Show Running-Config Cdp - Cisco Nexus 7000 Series Reference Manual

Show Commands

show running-config cdp

To display the Cisco Discovery Protocol (CDP) running configuration, use the show running-config
cdp command.
Syntax Description all
Defaults None
Command Modes
Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the CDP running configuration with defaults:
switch(config)# show running-config cdp all
!Command: show running-config cdp all
!Time: Fri Jan 15 22:19:20 2010
version 5.0(2)
logging level cdp 6
cdp advertise v2
cdp enable
cdp holdtime 180
cdp timer 60
cdp format device-id system-name
interface Ethernet6/1
cdp enable
interface Ethernet6/2
cdp enable
interface Ethernet6/3
OL-25806-03
show running-config cdp [all]
(Optional) Displays the running configuration with defaults.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
show running-config cdp
619