Show Running-Config Ipqos - Cisco Nexus 7000 Series Command Reference Manual

show running-config ipqos

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
show running-config ipqos
To display information about the running-system configuration for quality of service (QoS), use the
show running-config ipqos command.
Syntax Description all
Defaults
None
Command Modes Any command mode
Supported User Roles network-admin
vdc-admin
Command History Release
4.0
Usage Guidelines
This command does not require a license.
Examples This example shows how to display QoS information:
switch(config)# show running-config ipqos
version 4.0(3)
qos statistics
class-map type qos match-all abc
match dscp 0-3
class-map type qos match-all qqq
class-map type qos match-all class1
class-map type qos match-all cmapdef
class-map type qos match-all my_test
match cos 5
class-map type qos match-all my_class
match discard-class 56
class-map type qos match-all class_acl
class-map type qos match-all class_protocol
class-map conform-color-in
class-map conform-color-out
class-map exceed-color-in
class-map exceed-color-out
class-map type queuing match-any 2q4t-in-q1
match cos 5-7
class-map type queuing match-any 2q4t-in-q-default
match cos 0-4
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
QOS-114
show running-config ipqos [all]
(Optional) Displays configured and default information.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS Quality of Service Commands
OL-23378-01