Feature Bfd - Cisco Nexus 7000 Series Command Reference Manual

feature bfd

feature bfd
To enable Bidirectional Forwarding Detection (BFD) on the router Multiprotocol Label Switching
(MPLS) traffic engineering (TE) link and node protection, use the feature bfd command. To disable the
system to its default condition, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults
None
Command Modes Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to enable BFD on the device:
switch# configure terminal
Enter configuration commands, one per line.
switch(config)# feature bfd
Please disable the ICMP redirects on all interfaces
running BFD sessions using the command below
'no ip redirects '
switch(config)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
154
feature bfd
no feature bfd
Modification
This command was introduced.
Description
Protocol (LDP).
End with CNTL/Z.
F Commands
OL-24994-01