Feature Bgp - Cisco Nexus 3548 Command Reference Manual

Chapter Unicast Routing Commands

feature bgp

To enable the Border Gateway Protocol (BGP), use the feature bgp command. To disable BGP, use the
no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default Disabled
Command Modes Global configuration mode
Command History Release
5.0(3)A1(1)
Usage Guidelines You must enable the BGP feature before you can configure BGP.
This command requires the LAN Enterprise Services license.
Examples This example shows how to enable a BGP configuration:
switch# configure terminal
switch(config)# feature bgp
switch(config)#
This example shows how to disable the BGP feature:
switch# configure terminal
switch(config)# no feature bgp
switch(config)#
Related Commands Command
show bgp
show feature
router bgp
OL-27852-01
feature bgp
no feature bgp
Modified
This command was introduced.
Description
Displays BGP configuration information.
Displays the status of features on a switch.
Creates a BGP instance.
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
feature bgp
125