Example: Configuring Unicast Mac Address Filtering; Additional References For Device Administration; Feature History For Device Administration - Cisco Catalyst 9400 System Management Configuration Manual

Example: Configuring Unicast MAC Address Filtering

Example: Configuring Unicast MAC Address Filtering
This example shows how to enable unicast MAC address filtering and how to configure drop packets that
have a source or destination address of c2f3.220a.12f4. When a packet is received in VLAN 4 with this MAC
address as its source or destination, the packet is dropped:
Device(config)# mac address-table static c2f3.220a.12f4 vlan 4 drop

Additional References for Device Administration

Related Documents
Related Topic
For complete syntax and usage information for the
commands used in this chapter.

Feature History for Device Administration

This table provides release and related information for features explained in this module.
These features are available on all releases subsequent to the one they were introduced in, unless noted
otherwise.
Release
Cisco IOS XE Everest 16.6.1
Use Cisco Feature Navigator to find information about platform and software image support. To access Cisco
Feature Navigator, go to http://www.cisco.com/go/cfn.
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
40
Feature Feature Information
Device Administration The device administration allows to configure the
system time and date, system name, a login banner,
and set up the DNS.
Administering the Device
Document Title
Command Reference (Catalyst 9400 Series
Switches)