Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1034

Complete Software Guide for Junos
Verification
Purpose
Action
Meaning
Purpose
Action
930
®
OS for EX Series Ethernet Switches, Release 10.4
Power on SWA-2, and check the front panels to make sure that the switch is
8.
operating correctly.
Continue to power on the member switches one by one, checking the front panels
9.
as you proceed.
To confirm that the configuration is working properly, perform these tasks:
Verifying the Member IDs and Roles of the Member Switches on page 930
Verifying That the VCPs Are Operational on page 930
Verifying the Member IDs and Roles of the Member Switches
Verify that all the interconnected member switches are included within the Virtual Chassis
configuration and that their roles are assigned appropriately.
Display the members of the Virtual Chassis configuration:
user@SWA-0> show virtual-chassis status
Virtual Chassis ID: 0000.e255.00e0
Member ID Status Serial No
0 (FPC 0) Prsnt abc123
1 (FPC 1) Prsnt def123
2 (FPC 2) Prsnt abd231
3 (FPC 3) Prsnt cab123
4 (FPC 4) Prsnt fed456
5 (FPC 5) Prsnt jkl231
The show virtual-chassis status
configuration with the member IDs and mastership priority values. It also displays the
neighbor members with which each member is interconnected. The
same as the member ID.
Verifying That the VCPs Are Operational
Verify that the dedicated VCPs interconnecting the member switches are operational.
Display the VCP interfaces.
Mastership
Model Priority Role
ex4200-48p 128 Master*
ex4200-48p 128 Backup
ex4200-24p 128 Linecard
ex4200-24p 128 Linecard
ex4200-24p 128 Linecard
ex4200-24p 128 Linecard
command lists the member switches of the Virtual Chassis
Copyright © 2010, Juniper Networks, Inc.
Neighbor List
ID Interface
1 vcp-0
5 vcp-1
2 vcp-0
0 vcp-1
3 vcp-0
1 vcp-1
4 vcp-0
2 vcp-1
5 vcp-0
3 vcp-1
0 vcp-0
4 vcp-1
number is the
fpc