Novell NETWARE 6-DOCUMENTATION Manual page 2510

INITIALIZE SYSTEM
Purpose
Syntax
Using INITIALIZE SYSTEM
Additional Information
INSTALL
72
Utilities Reference
Use at the server console to enable the multiprotocol router configuration by
executing all commands in the system NETINFO.CFG file.
INITIALIZE SYSTEM
This command is typically executed from the INITSYS.NCF file during
server startup.
WARNING:
Executing INITIALIZE SYSTEM on a system that has already been
initialized can generate errors when the system discovers that the commands in
the NETINFO.CFG file have already been executed.
Topic
Server startup
®
In the NetWare 5 release, the INSTALL utility was replaced by the
NWCONFIG utility.
See "NWCONFIG" on page
See
"SERVER" on page 184
135.