Novell NETWARE 6-DOCUMENTATION Manual page 2504

Search Modes for Executable Files
66
Utilities Reference
IMPORTANT:
The syntax is /M=mode. Replace mode with a mode number from
the following table.
Mode
0
1
2
3
4
5
6
7
Use to
Search for instructions in the NET.CFG file (the
default mode).
Search the path specified in the file. If there is
no path, the file searches the default directory,
and then all search drives.
Search the path specified in the file. If there is
no path, the file searches only the default
directory.
Search the path specified in the file. If there is
no path, the file searches the default directory;
then if the open request is read only, the file
searches the search drives.
Reserved; don't use.
First search the path specified and then all
search drives. If there is no path, the file
searches the default directory and then all
search drives.
Reserved; don't use.
First search the path specified. If the open
request is read only, the file searches the
search drives. If there is no path, the file
searches the default directory and then all
search drives.