Http Port - Allied Telesis IE340 Series Command Reference Manual

D GUI V M
EVICE AND ISTA ANAGER

HTTP PORT

http port
Overview Use this command to change the HTTP port used to access the web-based device
GUI, or to disable HTTP management.
Use the no variant of this command to return to using the default port, which is 80.
Syntax http port {<1-65535>|none}
no http port
Default The default port for accessing the GUI is port 80.
Mode Global Configuration
Usage notes Do not configure the HTTP port to be the same as the HTTPS port.
Note that the device will redirect from HTTP to HTTPS unless you have disabled
HTTPS access, which we do not recommend doing.
Example To set the port to 8080, use the commands:
awplus#
awplus(config)#
To return to using the default port of 80, use the commands:
awplus#
awplus(config)#
To stop users from accessing the GUI via HTTP, use the commands:
awplus#
awplus(config)#
Related http secure-port
commands
service http
show http
Command Version 5.4.7-2.4: command added on AR-Series devices
changes
Version 5.4.8-0.2: command added on AlliedWare Plus switches
C613-50631-01 Rev A
EX C
OMMANDS
Parameter Description
<1-65535>
The HTTP port number
none
Disable HTTP management. You may want to do this if you need
to use port 80 for a different service or you do not need to use
HTTP at all.
configure terminal
http port 8080
configure terminal
no http port
configure terminal
http port none
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
130