Connecting Several Modules - HBM MP60 Operating Manual

PME-MP60/MP07

3.1 Connecting several modules

1.
Fig. 3.4: Connecting the flat ribbon cable
Several MP60 or MP07 modules may be connected over one flat ribbon
cable. This cable is used for local connection of the supply voltage and
synchronization between the modules. You should not interconnect more than
8 modules with one flat ribbon cable.
Connect MP60 to MP07
MP60
Shielded MP60-MP07 connector cable, Order no.: 2-9269.0226
Fig. 3.5: Connect MP60 and MP07 with shielded cable
A0616-13.4 en
Flat ribbon cable connector
Subsequent devices are
interconnected via this connector.
3.
MP07
2.
MP60 MP07
17
Colour coding
at Pin 1
58mm
Recommended
spacing of flat ribbon
cable connectors
Flat ribbon cable,
Product number 171
(see Accessories)
Transducer shaft
HBM