Connecting The Master/Slave Board - HBM GEN Series User Manual

2.2.2

Connecting the Master/Slave board

With the fiber-optic cable, connect the Master/Slave board labelled M, OUT of the master
mainframe to the top connector labelled M/S IN of the Master/Slave board of the slave
mainframes.
Figure 2-13: Connecting the Master/Slave
A Master mainframe (M, OUT)
B Slave mainframe (M/S IN)
C Fiber-optic cable
IMPORTANT
Connect the fiber-optic cable of the slave mainframes to the top connector labelled M/S IN
of its Master/Slave board.
With a Master/Slave board operating in slave mode only the top connector labelled M/S IN
is configured as a slave, all other connectors will not send or receive signals.
24 I2710-1.0 en