Bind-Attribute - HP 6125XLG Command Reference Manual

user roles of the user. When you assign other user roles to a local user who has the security-audit
user role, the system asks for your confirmation to delete the security-audit user role for the local
user.
Examples
# Configure the authorized VLAN of the network access user abc as VLAN 2.
<Sysname> system-view
[Sysname] local-user abc class network
[Sysname-luser-network-abc] authorization-attribute vlan 2
# Configure the authorized VLAN of user group abc as VLAN 3.
<Sysname> system-view
[Sysname] user-group abc
[Sysname-ugroup-abc] authorization-attribute vlan 3
# Assign the security-audit user role to device management user xyz as the authorized user role.
<Sysname> system-view
[Sysname] local-user xyz class manage
[Sysname-luser-manage-xyz] authorization-attribute user-role security-audit
This operation will delete all other roles of the user. Are you sure? [Y/N]:y
Related commands
display local-user
•
display user-group
•

bind-attribute

Use bind-attribute to configure binding attributes for a local user.
Use undo bind-attribute to remove binding attributes of a local user.
Syntax
bind-attribute { ip ip-address | location port slot-number subslot-number port-number | mac mac-address
| vlan vlan-id } *
undo bind-attribute { ip | location | mac | vlan } *
Default
No binding attribute is configured for a local user.
Views
Local user view
Predefined user roles
network-admin
Parameters
ip ip-address: Specifies the IP address of the user. This option applies only to 802.1X users.
location port slot-number subslot-number port-number: Specifies the port to which the user is bound. The
slot-number argument is in the range of 0 to 255, the subslot-number argument is in the range of 0 to 15,
and the port-number argument is in the range of 0 to 255. If the port that the user accesses is not the
same as that the user is bound, the authentication fails. This option applies only to LAN users.
21