Ip Source Guard Configuration Commands; Display Ip Check Source - HP 5120 SI series Command Reference Manual

IP source guard configuration commands

display ip check source

Syntax
display ip check source [ ipv6 ] [ interface interface-type interface-number | ip-address ip-address |
mac-address mac-address ] [ slot slot-number ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ipv6: Displays the IPv6 source guard entries. Without this keyword, the command displays the IPv4
source guard entries.
interface interface-type interface-number: Displays the binding entries of the interface specified by its
type and number.
ip-address ip-address: Displays the binding entries of an IP address.
mac-address mac-address: Displays the binding entries of an MAC address (in the format H-H-H).
slot slot-number: Displays the bindings of the member number of the device in the IRF.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the display ip check source command to display static and dynamic IP source guard entries.
With no parameters specified, the command displays the IPv4 IP source guard entries of all interfaces.
Related commands: ip check source.
Examples
# Display all IPv4 source guard entries.
<Sysname> display ip check source
Total entries found: 5
MAC Address
040a-0000-4000
040a-0000-3000
040a-0000-2000
040a-0000-1000
IP Address
10.1.0.9
10.1.0.8
10.1.0.7
10.1.0.6
286
VLAN Interface
2 GE1/0/1
2 GE1/0/2
2 GE1/0/2
N/A GE1/0/3
Type
Static
DHCP-SNP
DHCP-SNP
DHCP-RLY