Display Ip Vpn-Instance - HP FlexFabric 12500 Command Reference Manual

Neighbor ID: 95.1.1.1
Area: 0.0.0.0
Cost: 1
Timers: Hello 10s, Dead 40s, Retransmit 5s, Transmit Delay 1s
Request list: 0
MD5 authentication enabled.
The last key is 3.
The rollover is in progress, 1 neighbor(s) left.

display ip vpn-instance

Use display ip vpn-instance to display information about VPN instances.
Syntax
display ip vpn-instance [ instance-name vpn-instance-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
instance-name vpn-instance-name: Displays information about the specified VPN instance. The
vpn-instance-name is a case-sensitive string of 1 to 31 characters. If no VPN instance is specified, the
command displays brief information about all VPN instances.
Examples
# Display brief information about all VPN instances.
<Sysname> display ip vpn-instance
Total VPN-Instances configured : 1
VPN-Instance Name
abc
Table 28 Command output
Field
VPN-Instance Name
RD
Create Time
# Display detailed information about VPN instance vpn1.
<Sysname> display ip vpn-instance instance-name vpn1
VPN-Instance Name and Index : vpn1, 2
Route Distinguisher : 100:1
VPN ID : 1:1
State: P-2-P Type: Sham
Retransmit list: 0
State: Full
RD
1:1
Description
Name of the VPN instance.
RD of the VPN instance.
Time when the VPN instance was created.
77
Create time
2011/05/18 10:48:17