<Sysname>
free ftp user-ip
Use
free ftp user-ip
address.
Syntax
free ftp user-ip ip-address [ port port ]
Views
User view
Predefined user roles
network-admin
Parameters
ip-address
addresses of FTP connections, execute the
port port
connections, execute the
Examples
# Release the FTP connections established from the IP address 192.168.20.184.
<Sysname> free ftp user-ip 192.168.20.184
Are you sure to free FTP connection? [Y/N]:y
<Sysname>
free ftp user-ip ipv6
Use
free ftp user-ip ipv6 to
specific IPv6 address.
Syntax
free ftp user-ip ipv6 ipv6-address [ port port ]
Views
User view
Predefined user roles
network-admin
Parameters
ipv6-address
addresses of FTP connections, execute the
port port
connections, execute the
Examples
# Release the FTP connections established from IPv6 address 2000::154.
<Sysname> free ftp user-ip ipv6 2000::154
Are you sure to free FTP connection? [Y/N]:y
<Sysname>
to manually release the FTP connections established from a specific IPv4
: Specifies the source IP address of an FTP connection. To view the source IP
: Specifies the source port of an FTP connection. To view the source ports of FTP
display ftp-user
: Specifies the source IPv6 address of an FTP connection. To view the source IPv6
: Specifies the source port of an FTP connection. To view the source ports of FTP
display ftp-user
display ftp-user
command.
manually release the FTP connections established from a
display ftp-user
command.
87
command.
command.