Ip Source Guard Configuration Commands; Display Ip Source Binding - HP 3600 v2 Series Command Reference Manual

IP source guard configuration commands

display ip source binding

Syntax
display ip source binding [ static ] [ interface interface-type interface-number | ip-address ip-address |
mac-address mac-address ] [ slot slot-number ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
static: Displays static IPv4 source guard binding entries. If you do not specify this keyword, the command
displays all static and dynamic IPv4 source guard binding entries.
interface interface-type interface-number: Displays IPv4 source guard binding entries of the interface
specified by its type and number.
ip-address ip-address: Displays IPv4 source guard binding entries of an IP address.
mac-address mac-address: Displays IPv4 source guard binding entries of an MAC address (in the format
H-H-H).
slot slot-number: Displays IPv4 source guard binding entries on an IRF member switch. The slot-number
argument specifies the ID of an IRF member switch. The value range for the argument depends on the
number of member switches and their member IDs in the IRF fabric.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display ip source binding command to display IPv4 source guard binding entries.
Note the following when you do not use the static keyword:If you do not specify any other parameters
either, the command displays static and dynamic IPv4 binding entries on all ports.
Note the following when you use the static keyword: If you do not specify any other parameters, the
command displays all port-based static IPv4 binding entries.
Related commands: ip verify source and ip source binding.
Examples
# Display all IPv4 source guard binding entries.
<Sysname> display ip source binding
291