Display Ipv6 Host - HP A5120 EI Series Command Reference Manual

Field
Interface Name

display ipv6 host

Syntax
display ipv6 host [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display ipv6 host command to display the mappings between host names and IPv6 addresses in
the static domain name resolution table.
Related commands: ipv6 host.
Examples
# Display the mappings between host names and IPv6 addresses in the static domain name resolution
table.
<Sysname> display ipv6 host
Host
aaa
bbb
Table 24 Output description
Field
Host
Age
Flags
IPv6Address
Description
Interface name, which is available only for a DNS server with an IPv6 link-local
address configured
Age Flags
0 static
0 static
Description
Host name
Time for the entry to live. ―0‖ is displayed in the case of static configuration.
Type of the mapping. Static indicates a static mapping.
IPv6 address of a host
105
IPv6Address
2002::1
2002::2